November 08, 2017 by Mixcder
Whether they’re for working out or blocking out office noise, earbuds and headphones help us get through the day with a little help from our favorite tunes. With all that use, it’s not surprising that our earphones come in contact with a fair share of sweat, wax and dust that can clog up the speakers. To keep your listening device in pristine shape and keep sound quality at its best, treat your earphones to a good cleaning.
If you’re the type to wear headphones or earbuds for brief periods only after a shower, maybe it’s not that big a deal. As for the rest of us, we enjoy audio wherever and whenever. But either way, one shouldn’t overlook the hygienic details that build up over time: bacteria, sweat, dandruff, dead skin cells, oil, dust, grime, and ear wax.
Headphones and earbuds are manufactured from a variety of materials. So when cleaning, you want to choose safe solutions and techniques. Ready to disinfect and sanitize? Here’s what you’ll need:
· Isopropyl alcohol (91%)
· Distilled water
· Mild detergent (e.g. Dawn dish soap)
· Hydrogen peroxide (3%)
· Soft cotton or microfiber cleaning cloths
· Cotton swabs (e.g. Q-tips)
Most headphones and earbuds are predominantly made of plastic (e.g. exterior body/casing) and silicone (e.g. cables, ear tips, headband cushioning). The best way to clean these materials is by using a solution of isopropyl alcohol slightly diluted with distilled water.
Apply a sparing amount of the liquid to a clean cloth (or cotton swab for small crevices) before running it over all plastic and silicone surfaces. Add more when you need to. Remember to remove and thoroughly clean (inside and out) silicone earbud tips with a cotton swab dipped in the solution.
Isopropyl alcohol is choice because it is a disinfectant (kills germs), dissolves oil/grime/stickiness, evaporates quickly without residue/odor, and is generally non-reactive with most types of plastic and silicone. Don’t use bleach, as bleach can cause a negative reactions (e.g. corrode, affect/degrade physical properties, fade color) with some plastics and non-plastic matter.
Many earbud tips and bare (i.e. there is no fabric covering) headband padding are made of foam (e.g. Comply Foam). To clean, use only a cloth dampened with distilled water – no alcohol solution – and let it all air dry before use. If earbud tips are still noticeably dirty, then it’s probably time to replace them with a new set (foam tips aren’t meant to last forever).
More expensive headphones and earbuds frequently incorporate finer and more robust materials in construction. Headbands can expose steel, aluminum, or titanium when adjusting the length of ear cups. Ear cups themselves can also be made with wood and/or solid metal.
With any of these metals, stick with the solution of isopropyl alcohol and distilled water. Want to add a glorious shine? Whatever polish you would apply to jewelry is also safe to use on your headphones/earbuds (of the appropriate material type).
As for wood, alcohol will dissolve finishes/stains and quickly ruin appearances. So it’s best to use a wood-specific cleaner (e.g. Howard Orange Oil Wood Polish, Murphy’s Oil Soap). If you don’t have wood cleaner, you can substitute a mixture of warm water and mild detergent instead – also effective for cleaning most stereo speaker cabinets.
Earbuds (i.e. they rest outside the ear canal), earphones/IEMs (i.e. they insert into the ear canal), and microphone openings require extra care when cleaning – always be sure to remove tips first. Hold each earbud so that the opening is facing down – you want dislodged particles to fall out instead of being pushed in – and use a clean, dry toothbrush to gently scrub the area.
For tougher buildup, dip a cotton swab in a bit of hydrogen peroxide (it works to dissolve ear wax) and just barely touch it – you don’t want excess liquid to flow inside – against the surfaces. Give the peroxide a minute or so to loosen the buildup. Tap the back of the earbuds (still facing down) as you scrub with the toothbrush again.
Although you might be tempted to use a toothpick or needle to poke debris out of mesh screens or openings, it’s generally not a good idea. You’re more likely to force particles deeper inside. Instead, you can try using some non-toxic adhesive cleaning putty or gel (e.g. Blu Tack, Super/Cyber Clean). Don’t push too hard, lest the putty/gel itself gets stuck. You can also use cans of compressed air (don’t blow with your mouth, because of moisture/spit) to clear out openings – hold it far enough away so you don’t blast particles deeper inside.
A hearing aid vacuum can work wonders in cleaning out earbuds and microphone openings. You can also try using a standard-sized vacuum with the hose attachment. Nozzle too big, you say? All you need is a small paper cup, plastic drinking straw, and some duct tape (caulk could also work, but you have to wait for it to cure). Poke a hole in the bottom of the cup large enough to fit the straw. Push the straw in so that it’s halfway through the bottom of the cup, and then duct tape (both inside and out) where the straw touches the cup to make a complete seal. Now you have a tiny, straw-sized attachment for your vacuum!
Reference from: https://www.lifewire.com/clean-headphones-and-earbuds-4150341
0 people Like